Tire removal tool Product Introduction

Product Introduction

The tire removal tool can work on your tires and rims in a short time and without pulling force based on simple lever action, greatly reducing the cost of tire removal machinery. This tool can remove and install tubeless truck tires from 17.5”-24.5” and all super single tires.

Quickly and safely remove and install various vacuum tires in the wild or without special mechanical equipment.

3-piece tire removal tool introduction:

Material: 45# steel, precision casting, heat treatment, surface precision machining;

Surface treatment: nickel plating. Handle 230 degrees paint;

Packing method: 2 sets in a carton, 50 sets in a wooden box;

Specifications: tire removal tool length 140cm/diameter 32mm, tire installation tool length 117cm/diameter 27mm

Carton packaging size: 140x27x28.5cm

Special tool for large car vacuum tires, suitable for 17-24.5-inch tires, this tool can remove tires in 15 seconds and install tires in 8 seconds. This tool is practical and convenient, easy to operate, and affordable.

How to use the 3-piece tire removal tool:

Tool operation instructions:
Auxiliary tool set:

1. Inflation auxiliary kit; 2. Tire removal tool; 3. Tire installation tool; 4. Fixer; 5. Tire changing tool

Steps:

1. After deflation, use the tap rod to knock the tire apart from the steel rim
2. Apply lubricating oil to the tires and steel rims on both sides
3. Place the tire removal tool between the tire and the steel rim
4. Pry up the tire removal tool and knock the tire apart to separate it from the steel rim
5. Then place the tire removal tool between the tire and the steel rim, lift the tire, pry up the handle of the tire removal tool, and knock the tire apart from the steel rim completely.
6. First place the fixer into the steel rim, use the removal tool to install one side of the tire, and then take out the fixer.
7. Then place the fixer into the steel rim, use the tire installation tool to install the tire and then take out the fixer, re-lubricate, and prepare for inflation.
8. Place the sealing ring between the tire and the steel rim, lock the sealing ring, and start inflating. When the sealing ring falls off automatically, the inflation is completed. (Sealing strip inflation is optional)

7-piece tire removal tool set Introduction:

Material: 45# steel, precision casting, heat treatment, surface precision machining;
Surface treatment: nickel plating. Handle 230 degrees paint;
Packing method: 1 set in a carton, 50 sets in a wooden box;
Specifications: tire removal tool length 140cm/diameter 32mm, tire installation tool length 117cm/diameter 27m
Carton packaging size: 140x27x28.5cm

How to use the 7-piece tire removal tool:

Using a large rake to remove the tire:

1. Lay the tire flat and remove the valve core with a valve core wrench.
2. Use a tapping rod to press the tire bead and separate it from the steel ring.
3. Apply enough lubricant to the tire bead.
4. Place the large rake flat on the tire at the bead, insert the large rake into the bead, and then grab the end of the handle and pry the bead out.

Using a small pry tool to install the tire:

1. Before installing the tire, wipe the steel ring and the bead clean and apply lubricant on the edge.
2. Put the small hook on the edge of the steel ring and press it hard, then use a small pry to pry the bead into the gap between the bead and the steel ring, and install the upper and lower bead.
3. Use a high-pressure air cylinder to fill the bead. After inflation, screw on the valve core and valve cap, and the operation is complete.

Introduction to the tire changing tool

The tire changing tool is used for loosening and disassembling tires, welded with special steel
1) Diameter: 32mm
Length: 1.3m
Package: 4 pieces/box, 12715.59cm
Gross weight: 60kg
2)
Diameter: 38mm
Length: 1.2m
Package: 4 pieces/box, 1231414cm
Gross weight: 54kg

Classification

According to the material:
1) 45# steel
2) Seamless steel pipe

Advantage

Product features:

Suitable for truck vacuum tires, special metal production and processing, wear-resistant, non-deformation, reasonable structural design, labor-saving, convenient and fast disassembly and assembly.

This tool can remove the tire in 15 seconds and install the tire in 8 seconds. This tool is practical, convenient, easy to operate and affordable.

Customer Analyse

Suitable for tire and other industries:

Automobile manufacturers, automobile repair shops, tire repair shops,
domestic and foreign trading companies, tool distributors and dealers

Note:

1. Lubrication of tires and rims: must be clean, avoid excessive use
2. Do not use antifreeze, silicone polymer or oil-based lubricants, otherwise it will damage the rubber.
3. Scope of use: 17.5-24.5R vacuum tires