Powerful tire changer easily solves your tire removal problems

• Tire changer usage
• Classified by power type
• Tire removal steps
• Safety precautions for operating the tire changer

Tire changer usage

Tire changer, it is the vehicle maintenance equipment that demounts and mounts the tires during repairing the tires, which makes car repair process much easier

Classified by power type

At present, there are many types of tire removal machines, including pneumatic tire removal machines, fully automatic tire removal machines, manual tire removal machines, hydraulic tire removal machines, etc. The most common one is the pneumatic tire removal machine.
(1) The pneumatic tire stripping machine integrates various functions and is one of the most advanced models on the market. It is also the only model in China with the most complete functions and the best performance, including mobile clamping jaws. Clamping the rim is more suitable for modified car factories, and tire lifting can also be used. This machine has mechanical pneumatic assist arms on both sides, which is suitable for the operation methods of various countries, and the operation is relatively simple and fast. It can improve work efficiency and is especially suitable for supporting tire factory production lines. It adopts pneumatic backward tilting of the column and push-pull pneumatic automatic locking design. A simple and effective upward blasting device solves the difficulty of tire inflation. It is flexible, can be installed with the machine, and can be separated. It is suitable for various tire shops.
(2) The manual tire stripper is the latest improved product launched according to market demand, and its performance and quality are more stable and reliable. The tire stripping machine integrates tire removal, tire installation and tire inflation. It also has a right auxiliary arm and other devices to make the removal and installation of wide and flat tires more convenient, safer and more reliable. It is suitable for disassembling, installing and inflating various small and medium-sized car tires. It is a powerful assistant for automobile repair shops and automobile tire shops.
(3) The fully automatic tire removal machine combines tire removal, tire installation and tire inflation into one unit. The unique right auxiliary arm and other devices make it easier, safer and more reliable to remove and install wide and flat tires. It is suitable for disassembling, installing and inflating various small and medium-sized car tires. It is a useful tool for car repair shops and car tire shops.

Tire removal steps

1. First deflate the tires.
2. Remove debris and balance weights from the wheel to avoid damage to the wheel hub and danger.
3. Place the tire vertically between the separation shovel and the rubber pad of the machine base, and adjust it to the position as shown in the picture.
   Depress the separation shovel pedal, and the separation shovel will loosen the tire under the action of gas pressure.
4. Fix the wheel hub on the work plate
5. Apply a little lubricant to the edge of the wheel hub. Press the lift lever so that the detacher contacts the edge of the wheel hub.
6. Use one end of the remover as a fulcrum, use a lever to lift the outer edge of the tire, and step on the working plate to rotate
   The pedal rotates the working disc and the tire together, causing the upper edge of the tire to separate from the rim.
7. Use the same method to remove the lower edge of the tire to completely separate the tire from the rim.

Safety precautions for operating the tire changer

1. It is strictly forbidden to use the tire changing machine in the open air.
2. The power system of the tire changing machine must be equipped with an automatic circuit breaker, which can be adjusted to 30A.
3. Confirm that the running direction of the hydraulic motor is consistent with the direction of the arrow, otherwise a professional will need to change the phase line.
4. Operators must undergo professional training and hold operating certificates, and are not allowed to have long hair, wear loose clothes, ties, rings, or necklaces to prevent them from being caught by moving parts.
5. Before disassembly or assembly, the remaining air in the tires must be exhausted.
6. Before disassembly and assembly, the accumulated water in the gasoline filter element must be drained to ensure that the motor rotation belt is appropriately tight.
7. All moving parts must be kept clean, cleaned with gasoline if necessary, and lubricated to ensure that the disassembler rotates flexibly.
8. When disassembling tires, it is strictly prohibited to inflate them.